5.3 Traversal Cloud

Traversal Cloud is a secure NAT tunnel tool to provide remote control function on the 4G outdoor routers and connected hosts.

After enabling the Traversal Cloud, you can access and control the 4G routers anytime, anywhere, on a web browser. It offers the easiest way to look over your networks. None public IP address and DDNS configuration required. It’s completely free!

Working principle of Traversal Cloud

5.3.1 - Web Access

A web proxy is pre-built in the firmware. The traversal cloud is turn off by default. You can follow the below steps to enable it.

  1. Log in the router, go to Services > Traversal Cloud.

  2. Click the checkbox Enable, then click the button Save & Apply.

  3. Now you can access your router at the Cloud Address on a web browser.

Recommended to set up a strong router password (go to System > Administration) before enable the traversal cloud.

5.3.2 - Debug

If unable to access the cloud address, please check the below factors.

  1. Please ensure the traversal cloud has been enabled. After enabling the checkbox, please click the Save & Apply button.

  2. Before access the traversal cloud server, the router must have an Internet connection. Please check the Internet connection on the router.

  3. If you once turned off the traversal cloud function within a power cycle, please reboot the router to refresh the traversal connection session.

*** REMINDER ***

The traversal cloud is relay on the carrier's gateway. Some carriers might block the traversal technology. We do not 100% ensure the cloud address works perfectly. The traversal cloud is provided with free, and it's not involved in the outdoor router quality or working performance.